Main Site Design Center
TAKE ADVANTAGE OF DELIVERY & PICKUP TODAY!

Simpson DTC Roof Truss Clips

Simpson Strong-Tie Company

For alignment control between a roof truss and nonbearing walls; the 1 1/2" slot permits vertical truss chord movement when loads are applied.

Material

  • 18 gauge (43 mil)

Finish

  • Galvanized (G90)

Installation

  • Use all specified fasteners; see General Notes.
  • Use STC or DTC depending on required loads.
  • STC / STCT / DTC may be used with proprietary material sections. Contact material supplier for specific installation details.
  • Use STCT where truss or rafter is separated from the top plate of the nonbearing wall.
  • Install slot screws in the middle of the slot.

We Also Recommend

L-Angle Z-Max, 5-In., L50Z
Various

L-Angle Z-Max, 5-In., L50Z
L-Angle Connector, 16-Ga. Steel, 5-In.
Simpson Strong-Tie

L-Angle Connector, 16-Ga. Steel, 5-In.
M-D Silver Satin 1-1/4 In. x 3 Ft. Aluminum Seam Binder
M-D

M-D Silver Satin 1-1/4 In. x 3 Ft. Aluminum Seam Binder
Shepherd Hardware 1/2-Inch SurfaceGard White Adhesive Bumper Pads, 9-Count (1/2")
Shepherd Hardware

Shepherd Hardware 1/2-Inch SurfaceGard White Adhesive Bumper Pads, 9-Count (1/2")
Shepherd Hardware 1/2-Inch SurfaceGard Clear Adhesive Bumper Pads, 9-Count (1/2")
Shepherd Hardware

Shepherd Hardware 1/2-Inch SurfaceGard Clear Adhesive Bumper Pads, 9-Count (1/2")